E–WASTE RECYCLING PLANT
| Capacity
|
2164500 kgs. /annum
|
Plant and Machinery cost
|
233.00
Lakhs
|
| Working Capital
|
0.00
|
Rate of Return (ROR)
|
22.00
%
|
| Break Even Point (BEP)
|
49.00
%
|
TCI
|
500.00
Lakhs
|
| Cost of Project
|
500.00Lakhs
|
Description:
E-waste is a popular, informal name for electronic products nearing the end of their useful life. Computers, televisions, VCRs, stereos, copiers, and fax machines are common electronic products. While there is no generally accepted definition of e-waste, in most cases, e-waste comprises of relatively expensive and essentially durable products used for data processing, telecommunications or entertainment in private households and businesses. According to the recent survey, electronic discards are one of the fastest growing segments of our nation's waste stream. Electronic wastes, e-waste , e-scrap , or Waste Electrical and Electronic Equipment ( WEEE ) is a description of surplus, obsolete, broken or discarded electrical or electronic devices. According to the OECD, any appliance using an electric power supply that has reached its end-of-life would come under WEEE. Technically, electronic waste is the component which is dumped or disposed or discarded rather than recycled, including residue from reuse and recycling operations. Because loads of surplus electronics are frequently coming led (good, recyclable, and non-recyclable), several public policy advocates apply the term e-waste broadly to all surplus electronics. WEEE has been identified as one of the fastest growing sources of waste in the EU, and is estimated to be increasing by 16-28 per cent every five years. Within each sector a complex set of heterogeneous secondary wastes is created. However, there exist huge variations in the nature of electronic wastes between sectors, and treatment regimes appropriate for one cannot be readily transferred to another. There is also a lack of definition around the specific details of the treatment requirements of WEEE. It is therefore, the process of recycling of components containing hazardous compounds such as halogenated chlorides and bromides used as flame-retardants in plastics, Copper, PVC sheathing of wires etc., has emerged as a life threatening process, as recycling of such materials produces harmful dioxins. Land filling e-waste, one of the most widely used methods of disposal, is prone to hazards because of leachate which often contains heavy water resources. Older landfill sites and uncontrolled dumps pose a much greater danger of releasing hazardous emissions. Mercury, Cadmium and Lead are among the most toxic leachates. Market survey WEEE has been identified as one of the fastest growing sources of waste in the India, and is estimated to be increasing by 16-28 per cent every five years. Within each sector a complex set of heterogeneous secondary wastes is created. Although treatment requirements are complicated, the sources from any one sector possess many common characteristics. However, there exist huge variations in the nature of electronic wastes between sectors, and treatment regimes appropriate for one cannot be readily transferred to another. The first comprehensive study to estimate the annual generation of e-waste in India and answer the questions above is being undertaken up by the National WEEE Taskforce. So far the preliminary estimates suggest that total WEEE generation in India is approximately 1, 46,000 tons per year. The top states in order of highest contribution to WEEE include Maharashtra, Andhra Pradesh, Tamil Nadu, Uttar Pradesh, West Bengal, Delhi, Karnataka, Gujarat, Madhya Pradesh and Punjab. The city wise ranking of largest WEEE generators is Mumbai, Delhi, Bangalore, Chennai, Kolkata, Ahmadabad, Hyderabad, Pune, Surat and Nagpur. Almost 50% of the PC's sold in India are products from the secondary market and are re-assembled on old components. The remaining market share is covered by multinational manufacturers (30%) and Indian brands (22%).
|
E–Waste Recycling Plant
| Capacity
|
2164500 kgs. /annum
|
Plant and Machinery cost
|
233.00
Lakhs
|
| Working Capital
|
0.00
|
Rate of Return (ROR)
|
22.91
%
|
| Break Even Point (BEP)
|
49.81
%
|
TCI
|
500.00
Lakhs
|
| Cost of Project
|
500.00Lakhs
|
Description:
E-waste is a popular, informal name for electronic products nearing the end of their useful life. While there is no generally accepted definition of e-waste, in most cases, e-waste comprises of relatively expensive and essentially durable products used for data processing, telecommunications or entertainment in private households and businesses. Electronic wastes, e-waste, e-scrap, or Waste Electrical and Electronic Equipment (WEEE) are a description of surplus, obsolete, broken or discarded electrical or electronic devices. WEEE has been identified as one of the fastest growing sources of waste in the India, and is estimated to be increasing by 16-28 per cent every five years. So far the preliminary estimates by the National WEEE Taskforce suggest that total WEEE generation in India is approximately 1, 46,000 tons per year. This give rise to the demand of recycling plants to reuse/recycle the waste from electronics world.
|
E–Waste Recycling Plant
| Capacity
|
2164500 Kgs /Annum
|
Plant and Machinery cost
|
233.00
Lakhs
|
| Working Capital
|
0.00
|
Rate of Return (ROR)
|
28.00
%
|
| Break Even Point (BEP)
|
46.00
%
|
TCI
|
526.00
Lakhs
|
| Cost of Project
|
526.00Lakhs
|
Description:
Electronic wastes, "e-waste", "e-scrap", or "Waste Electrical and Electronic Equipment" ("WEEE") is a description of surplus, obsolete, broken or discarded electrical or electronic devices. Technically, electronic "waste" is the component which is dumped or disposed or discarded rather than recycled, including residue from reuse and recycling operations. Because loads of surplus electronics are frequently commingled (good, recyclable, and non-recyclable), several public policy advocates apply the term "e-waste" broadly to all surplus electronics. E-Waste Recycling Technology Used in India: Decontamination, Dismantling, Pulverization/ Hammering, Shredding, Density separation using water, E-waste trade value chain, Environmentally Sound E-waste Treatment Technology, CRT treatment technology. WEEE has been identified as one of the fastest growing sources of waste in the India, and is estimated to be increasing by 16-28 per cent every five years. Within each sector a complex set of heterogeneous secondary wastes is created. Although treatment requirements are complicated, the sources from any one sector possess many common characteristics. However, there exist huge variations in the nature of electronic wastes between sectors, and treatment regimes appropriate for one cannot be readily transferred to another. New entrepreneurs can well venture in this sector.
|
E–Waste Recycling Plant
| Capacity
|
Monitor : 3000 Pcs. /annum,Plastic Dana: 1559 MT/annum,Copper Wire Scraps: 7.5 MT/annum,Glass from
|
Plant and Machinery cost
|
233.00
Lakhs
|
| Working Capital
|
0.00
|
Rate of Return (ROR)
|
28.00
%
|
| Break Even Point (BEP)
|
46.00
%
|
TCI
|
526.00
Lakhs
|
| Cost of Project
|
526.00Lakhs
|
Description:
Electronic wastes, "e-waste", "e-scrap", or "Waste Electrical and Electronic Equipment" ("WEEE") is a description of surplus, obsolete, broken or discarded electrical or electronic devices. Technically, electronic "waste" is the component which is dumped or disposed or discarded rather than recycled, including residue from reuse and recycling operations. Electronic Waste – or e-waste – is the term used to describe old, end-of-life electronic appliances such as computers, laptops, TVs, DVD players, mobile phones, mp3 players etc. which have been disposed of by their original users. Composition of e-waste is very diverse and differs in products across different categories. It contains more than 1000 different substances, which fall under “hazardous†and “non-hazardous†categories. Broadly, it consists of ferrous and non-ferrous metals, plastics, glass, wood & plywood, printed circuit boards, concrete and ceramics, rubber and other items. Iron and steel constitutes about 50% of the e-waste followed by plastics (21%), non-ferrous metals (13%) and other constituents. Non-ferrous metals consist of metals like copper, aluminium and precious metals ex. silver, gold, platinum, palladium etc. The presence of elements like lead, mercury, arsenic, cadmium, selenium, and hexavalent chromium and flame-retardants beyond threshold quantities in e-waste classifies them as hazardous waste. WEEE has been identified as one of the fastest growing sources of waste in the India, and is estimated to be increasing by 16-28 per cent every five years. Within each sector a complex set of heterogeneous secondary wastes is created. Although treatment requirements are complicated, the sources from any one sector possess many common characteristics. However, there exist huge variations in the nature of electronic wastes between sectors, and treatment regimes appropriate for one cannot be readily transferred to another. As a whole E–Waste Recycling is a good project for entrepreneurs for investment.
|
E–Waste Recycling Plant
| Capacity
|
Monitors:10 Nos./Day•Plastic Granules: 4,600.00 Kgs/Day •Copper Wire Scraps:20 Kgs/Day •Glass from C
|
Plant and Machinery cost
|
233.00
Lakhs
|
| Working Capital
|
0.00
|
Rate of Return (ROR)
|
8.00
%
|
| Break Even Point (BEP)
|
59.00
%
|
TCI
|
613.00
Lakhs
|
| Cost of Project
|
613.00Lakhs
|
Description:
E-waste is a popular, informal name for electronic products nearing the end of their "useful life." Computers, televisions, VCRs, stereos, copiers, and fax machines are common electronic products. Many of these products can be reused, refurbished, or recycled. Unfortunately, electronic discards are one of the fastest growing segments of our nation's waste stream. Electronic wastes, "e-waste", "e-scrap", or "Waste Electrical and Electronic Equipment" ("WEEE") is a description of surplus, obsolete, broken or discarded electrical or electronic devices. Technically, electronic "waste" is the component which is dumped or disposed or discarded rather than recycled, including residue from reuse and recycling operations.
?
A range of techniques is currently applied for retrieving components and materials from WEEE. The essential features of these systems generally conform to a scheme of: sorting/disassembly; size reduction; separation. The main components of WEEE, in terms of weight, are iron and steel followed by plastics as can be seen, iron and steel are the most common materials found in electrical and electronic equipment and account for almost half of the total weight of WEEE. Plastics are the second largest component by weight representing approximately 21% of WEEE. Non-ferrous metals including precious metals represent approximately 13% of the total weight of WEEE and glass around 5%.
WEEE has been identified as one of the fastest growing sources of waste in the India, and is estimated to be increasing by 16-28 per cent every five years. Within each sector a complex set of heterogeneous secondary wastes is created. Although treatment requirements are complicated, the sources from any one sector possess many common characteristics. However, there exist huge variations in the nature of electronic wastes between sectors, and treatment regimes appropriate for one cannot be readily transferred to another. Thus, as an entrepreneur, E- Waste recycling offers an exciting opportunity to you.
|